Conversion

Home
Heating
Gas
Water
Fridge
240v Supply
12volt Supply
Fittings
D.V.L.A.
 

 

 


The first part of the conversion was the planning.

Many plans where considered, the main ideas coming from my very good friend Roy, who has an exceptional talent for planning motor home conversions .  

One of the main considerations was for a fixed bed, as the van was to be used both as a day to day vehicle, and also as a Motorhome, and I did not want to have to keep making the bed up.

We decided after much measuring to site the bed across the rear doors, at a higher level than is normal, to allow storage, water tank, gas cabinet etc. to be sited below. This also allowed, due to the curvature of the van body a longer bed at 6' 2". (see picture 1)

As can be seen from the plan (click for larger image) the layout apart from the bed is fairly compact, the water tanks, fridge, gas bottle store, and slide out "port potty" are all mounted under the bed.

The water heater and blown air space heater are situated under the sink, mounted onto the floor (click here for details)

Once the vehicle is complete it will be re-registered with the DVLA as Body type "Motor caravan". For the guidance notes from VOSA, click here.
(opens new page-see last section)

 




(1). Bed frame layout
across the rear doors


Plan

 

 

 


Home | Workers! | The van | Conversion | Travels | Sites Index | Suppliers | Photo Gallery | Links | Contact Information | Site Map

 ©Copyright TheMotorhome.co.uk 2008
For problems or questions regarding this web contact [Webmaster].
(please remove "nospam" from email address before sending)
Last updated: 23/05/08.